Your USB-C dongle stops eating the first second of every song.
Audio Alive is an Android utility that keeps the DAC inside a USB-C to 3.5mm headphone dongle awake, so the first one to two seconds of a song, video or notification are no longer cut off after a pause.
For Android 8.0+ · Works with USB-C to 3.5mm DAC dongles
The problem
Why does a USB-C dongle cut off the start of audio?
Cheap USB-C to 3.5mm adapters have a tiny DAC (digital-to-analog converter) that saves power by sleeping after a few seconds of digital silence. When you press play, it has to wake up first, and the first 1–2 seconds of sound are lost.
Without Audio Alive
Pause, wait, press play: the DAC is asleep, so the opening words, beats or notification sounds vanish.
With Audio Alive
An inaudible tone keeps the DAC fed, so it never sleeps. Every song, video and voice message starts on time.
How it works
Three steps, then forget about it.
Audio Alive plays a 20 kHz tone you cannot hear into the USB output only. The DAC never sees silence, so it never falls asleep.
Turn it on once
Tap the power button. Audio Alive runs as a small foreground service and waits for a USB audio device.
Plug in your dongle
When a USB-C DAC appears, the app starts a 20 kHz tone at about −70 dBFS, pinned to that output only.
Listen as usual
Android mixes the tone under your music, so the DAC never sees silence and never falls asleep. Unplug and it stops.
Features
Built to stay out of your way.
Small, quiet and automatic. It only does one thing, and it does not touch your other apps.
Never pauses your music
No audio focus is requested, so Spotify, YouTube and other players are never ducked, paused or interrupted.
Inaudible by design
A 20 kHz tone at roughly 10 LSB of 16-bit audio (about −70 dBFS): above what most adults can hear, below anything you would notice.
Volume-compensated
Android lowers the stream with your media volume. Audio Alive measures that and corrects for it, so the DAC gets the same level at any volume. Capped at −15 dBFS.
Automatic plug & unplug
The tone starts when a USB audio device connects and stops when it disconnects. Nothing plays through your phone speaker.
Tunable per dongle
Some DACs need a stronger signal. Adjust amplitude from 1 to 50 LSB and frequency from 16 to 23.5 kHz.
Light on battery
One small 48 kHz stereo stream, only while a dongle is connected. With nothing plugged in, the app just waits.
At a glance
Technical details
| Platform | Android 8.0 (API 26) or newer |
|---|---|
| Works with | USB-C DAC dongles and USB headsets (USB audio class) |
| Keep-alive signal | 20 kHz sine tone, default level 10 LSB (≈ −70 dBFS) |
| Audio format | 48 kHz, 16-bit, stereo, routed only to the USB output |
| Adjustable | Amplitude 1–50 LSB · Frequency 16–23.5 kHz |
| Audio focus | None — other apps are never paused or ducked |
| Status | Available on Google Play |
FAQ
Frequently asked questions
Why does my USB-C dongle cut off the first second of audio?
Many inexpensive USB-C to 3.5mm adapters contain a DAC that powers down after it receives a few seconds of digital silence. When playback resumes, the DAC needs a moment to wake up and the first one to two seconds of sound are lost.
How does Audio Alive fix it?
It plays a near-silent 20 kHz tone into the USB output while the dongle is plugged in. Because the DAC never receives pure silence, it never goes to sleep, and the start of every sound plays normally.
Can I hear the tone?
Most adults cannot. The default tone is 20 kHz at about −70 dBFS. If you can hear it, lower the amplitude or move the frequency higher, up to 23.5 kHz.
Will it pause or lower my music?
No. Audio Alive does not request audio focus, so music, video and podcast apps keep playing at full volume. Android simply mixes the tone underneath.
Does it work with Bluetooth headphones or the built-in headphone jack?
No, and it is not needed there. Audio Alive only targets USB audio outputs such as USB-C DAC dongles and USB headsets, which is where the sleep problem happens.
Does it drain the battery?
Very little. It runs one low-rate audio stream only while a USB dongle is connected, and idles when nothing is plugged in.
Why does it stop after a reboot?
Android 15 and newer do not allow media-playback services to start automatically at boot. Open Audio Alive once after restarting your phone. On Xiaomi, Samsung and Oppo phones, also allow autostart and disable battery optimisation for the app.
Is Audio Alive available yet?
Yes. Audio Alive is available on Google Play for Android 8.0 and newer.
Get Audio Alive on Google Play
Install Audio Alive, plug in your USB-C dongle and switch it on. The first second of every sound stays yours.
More apps from the same maker
See all apps
EasyKaraSync lyrics word by word and export watermark-free karaoke MP4 videos at 60fps for free. Pro adds ASS/LRC/SRT downloads and desktop transparent video export.(opens in a new tab)
Easy SplitSplit your photos into seamless grids or vertical slides. Perfect for TikTok, Instagram, and more.(opens in a new tab)
Snow ScreenA magical 3D parallax snowfall overlay for your Android status bar, home screen, and lock screen — plus a Chrome extension that brings the snow to your browser.
River Crossing: Brain PuzzlesComing soon37 offline logic puzzles: classic river crossings, board puzzles, and pouring and counting challenges. No account, no ads, no tracking.